What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 00:15
Here is a simplified AC power diagram.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What is your favourite summer outfit? Why?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
I post the exact comment here.
2024–10–16 [ OO OLAOYE OYEBODE ]
Common Diabetes Drug Linked to 'Exceptional Longevity' in Women - ScienceAlert
It also is a device that limits the change in current flow.
The other is “what does a “fuse” do?”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but this device (an Inductor) … impedes the rapid changes in the current.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This device then solves the entire problem.
There are three different concepts here that are getting confused.
a photo is worth a thousand words.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What is the estimated number of people with an extra X chromosome?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The two rules investors need to follow right now as the S&P 500 eyes a return to 6,000 - MarketWatch
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
What did Starbucks and Dunkin' Donuts do wrong in Sweden?
But… the neutral is now “floating” because of the 1 ohm resistance.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes Rainy Season and Lightning.
How come Taiwan is LGBT friendly, yet Japan and South Korea are not?
What does a fuse do?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Is it possible to revive a dead person in real life with black magic?
First Sentence:
One
So, the voltage could go up to 500 volts, and the fuse will not open up.
eight
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This couple paid $19M for 2 Jersey Shore houses. Then they demolished them. - NJ.com
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
In schematic diagrams this is the symbol for a fuse:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
This one hit behind the barn.
The bolt then partially travels down the line to your home.
This is where the MOV conducts again, and dissipated the energy.
Edit 2024–10.
2024–10–10[John johnson John Johnson ]
Upvotes:
what exactly is a ‘surge’ protector?
(Dc diagram shown, AC is similar).
It seems Mohan does not understand the difference between a comment and an Answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes the function of a fuse.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
[image of Common-mode choke]
A circuit breaker is similar, but is resettable.
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Now when you have a certain ac resistance, then a current flows in a loop.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Barnstars:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
For this case there are devices called Metal oxide varistors (MOV).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
An AC voltage/ current source, and an ac inductive load.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
A fuse is a non-resetable over current circuit protector.
the problem then depends on "how fast does the fuse operate?".
But it can get overloaded, and no longer works.
This is 'the assistant's answer'
nine
At least they know the answer if they wanted it.